Linksys Dual Gigabit with 24-Port 10/100 Switch EF24G2 - Manual (Page 7)

Instant Gigabit ® Series
2. The following screen will appear. Enter a Name for this connection. In
the example below, the name of the connection is EF24G2. Click the OK
button.
3. The following screen will appear. In the bottom drop down box labled
Connect using:, click the arrow and choose the COM port that the
Switch will be connected to. In the example below, COM1 is the port
selected. Click the OK button.
8
EtherFast ® Dual Gigabit with 24-Port 10/100 Switch
4. When the following screen appears, make sure that the switch’s serial port
settings are as follows:
BAUD RATE: 38400
DATA BITS:
8
PARITY:
None
STOP BITS:
1
FLOW CONTROL:
None
Click the OK button. You can now go to the next section, Configuring
the Switch.
9