Linksys Tribox SPA400 User Manual

Page 3

Advertising
background image

Step 3 – Set the SPA400 to a Fixed IP address

Asterisk needs to access your SPA400, so it needs to be set to a
fixed ip address. To do this: -

Under Setup -> Basic Setup

• Select Fixed IP address and enter a valid fixed IP address for

your network.

• Be sure to enter a DNS server, if you do not know enter the

Telstra DNS server 139.130.4.5 – You can leave the secondary
blank

• Set your time zone.

• Click Save Settings

• Restart System


























Sample Config – Use Address Valid For Your Network

Check with the network administrator if unsure.


Note the IP address in the Notes Section.

Advertising
See also other documents in the category Linksys Hardware: