Lindy 25008 User Manual

Page 18

Advertising
background image

18

8

PRODUCT SPECIFICATIONS

8-Port Gigabit Ethernet Smart Switch

Model

(19 inches case)

Standards

ƍ

IEEE 802.3: 10BASE-T

ƍ

IEEE 802.3u: 100BASE-TX

ƍ

IEEE 802.3ab: 1000BASE-T

ƍ

IEEE 802.3x: Flow-Control support

ƍ

IEEE 802.1D (Bridging)

ƍ

IEEE 802.1P (Priority)

ƍ

IEEE 802.1Q (Virtual LAN)

Ports

ƍ

Eight (8) 1000BASE-T/100BASE-TX/10BASE-T TP Copper Ports

Media Support

ƍ

10BASE-T: Category 3, 4 or 5 TP

ƍ

1000BASE-TX/1000BASE-T: Category 5 TP

Bandwidth

ƍ

1000BASE-T 2000/1000/200/100/20/10 Mbps

Forwarding/Filtering
Rate

ƍ

1488000 packets/second per port @ 1000Mbps maximum

ƍ

148800 packets/second per port @ 100Mbps maximum

ƍ

14880 packets/second per port @ 10Mbps maximum

Latency

ƍ

2.2

µ

sec @1000Mbps minimum

ƍ

11

µ

sec @100Mbps minimum

ƍ

75

µ

sec @ 10Mbps minimum

MAC Addresses

ƍ

16K Self-Learning

Console port

ƍ

RS232 Cable

Buffer Memory

ƍ

1.5M bytes data package memory

Duplex Modes

ƍ

Auto-Negotiation

Crossover

ƍ

All ports have Auto-Crossover function

Switch

ƍ

One (1) for Power

LED Indicators

ƍ

One (1) per port for display Link/ACT

ƍ

One (1) per port for display speed- 1000Mbps(Green)

ƍ

One (1) per port for display 100Mbps(Green) or 10Mbps(Off)

ƍ

One (1) per port for display Full-duplex and Half –Duplex (collision)

Power Supply

ƍ

Full range Auto-Switching

ƍ

Input voltage: 100 ~ 240 +-10% VAC/ 50 ~ 60Hz

Power Consumption

ƍ

30 W maximum

Environment

ƍ

Operating Temperature: 0

°

~ 45

°

C (32

°

~ 113

°

F)

ƍ

Storage Temperature: 0

°

~ 70

°

C

ƍ

Humidity: 10% ~ 90% Non-Condensing

Dimensions

ƍ

442 x 185 x 44mm
(17.40x7.28x1.73 inches)

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to

Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference

in a commercial environment.
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

CE MARK WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

Advertising