La Crosse Technology WS-7032U - Manual (Page 4)

4
QUICK SET-UP GUIDE
Hint: Use good quality Alkaline Batteries and
avoid rechargeable batteries.
1. Have the indoor station and outdoor
remote 3 to 5 apart.
2. Batteries should be out of both units for
10 minutes.
3. Place the batteries into the outdoor
remote first then into the indoor station.
(All outdoor remotes must be started
before the indoor station)
4. DO NOT PRESS ANY BUTTONS
FOR 10 MINUTES.
In this time the display and sensor will start to talk to
each other and the display will show both the indoor
temperature and an outdoor temperature. If the
station does not display both temperatures after the
10 minutes please retry the set up as stated above.
After both indoor and outdoor temperatures are
displayed for 10 minutes you can place your sensor
outdoors and set your time.