Lowrance electronic Handheld Mapping GPS Receiver - Manual (Page 118)

110
data boxes on this screen can show information such as your ground
speed, track, distance and bearing to destination.
Navigation Page, going to an address. The compass is in Bearing Up mode,
so you can see that the destination is to your west. Your current facing is
north (a 294º heading) toward an address 355º (bearing) away. If you were
navigating to a waypoint, the waypoint's icon would appear on the edge of
the compass rose, indicating the proper direction. An information box on
this screen indicates the destination is 0.67 miles away.
Calibrate Compass
To find your heading, the iFINDER uses a sensor that detects the mag-
netic field in the area. This field can be affected by any large object,
particularly by metallic items such as your car or the barrel of your ri-
fle. Over time, all these variations gradually interfere with the
iFINDER's measurements, and will result in poor performance by the
compass.
In order to keep your iFINDER reporting accurate compass headings, all
you have to do is calibrate it when you begin to notice this deterioration. To
do this, use the
C
ALIBRATE
C
OMPASS
command on the Compass Page menu.
1. From the Compass Page, press MENU |
↓ to
C
ALIBRATE
C
OMPASS
| ENT .
In Bearing Up mode
(shown), the direc-
tion of your destina-
tion is shown at the
top of the compass
Current track or
heading, shown
in degrees
Compass bearing
to destination
Battery power
indicator
Navigation
information
data boxes
Track or compass
heading indicator,
showing facing
direction