Lenovo D156 WIDE 4415-AB1 - Manual (Page 15)

2-6 D156 Wide Flat Panel Monitor User’s Guide
Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1366 x 768 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Addressability Refresh rate
NTSC VGA 60Hz
PAL VGA 50Hz
640 x 350 70Hz
640 x 480 60Hz
640 x 480 72Hz
640 x 480 75Hz
800 x 600 60Hz
800 x 600 75Hz
1024 x 768 60Hz
1024 x 768 70Hz
1024 x 768 75Hz
1360 x 768 60Hz
1366 x 768 60Hz