LightSpeed Technologies 705iR - Manual (Page 3)

The LightSPEED 705iR Portable Infrared Wireless
Amplification System is warranteed against
malfunction due to defects in materials and
workmanship for a period of five years beginning at
the date of the purchase. Batteries and the optional
TK-250 Headset Microphone are guaranteed for
one year. Products will be repaired or replaced at
LightSPEED’s option during the warranty period.
Warranty does not extend to finish, appearance, or
malfunctions due to abuse or misuse. Repairs
performed by any other than LightSPEED will void
this warranty. Our Service Department
(800.732.8999, 7 a.m. – 5 p.m., PST) will handle
all your repair/replacement needs.
Quick-start Guide:
Plug battery charger/power supply
into 705iR.
Plug one end of power cable into battery charger/power
supply and the other end into AC outlet.
To turn 705iR on, rotate CH A POWER knob clockwise
Switch LT-70 LightMic ™ Transmitter to the ON position
(confirm LT-70 is set to CH A.)
Clip LT-70 to black lavaliere cord. Loop cord around neck.
Adjust cord length until the top of the LT-70 rests
on the collarbone.
Turn CH A POWER knob to adjust volume to desired level.
Simply follow the six steps on this page
to get your 705iR up and running in a
matter of minutes!
To take full advantage of the features the
705iR has to offer, as well as its applica-
tions, please take time to read through
the entire manual.