Land Pride ZXT60 User Manual
Page 19
17
Section 2: Operating Procedures
7/30/12
ZXT54 & ZXT60 Pro Zero Turn Mowers 357-271M
To Decrease Speed and Stop
!
WARNING
In the event of a system shutdown while mowing, move control
levers to neutral and spread them fully apart. See Figure 2-4
on Page 14. Also, engage the park brake lever to aid in
slowing and stopping the mower.
Refer to Figure 2-7:
Moving control levers an equal distance towards neutral
will decrease travel speed.
•
When moving forward, pull back gently on control
levers to decrease speed. The further back the control
levers are pulled the slower the travel speed until
neutral is reached.
•
When backing up, push forward gently on control
levers to decrease speed. The further forward the
control levers are pushed the slower the travel speed
until neutral is reached.
•
Move control levers to neutral to stop. (Ref. Frame #2)
•
Spread both control levers fully apart and engage park
brake. (Ref. Frame #1)
To Steer
Refer to Figure 2-7:
•
To Steer Straight While Traveling Forward
(Ref. Frame #3):
Push control levers forward an equal distance.
•
To Steer Straight While Backing Up (Ref. Frame #4):
Pull control levers rearward an equal distance.
•
To Turn Left While Traveling Forward (Ref. Frame #5):
Move right control lever farther forward from neutral
than the left control lever.
•
To Turn Left While Backing Up (Ref. Frame #6):
Move right control lever farther back from neutral
than the left control lever.
•
To Turn Right While Traveling Forward:
Move left control lever farther forward from neutral
than the right control lever.
•
To Turn Right While Backing Up:
Move left control lever farther back from neutral
than the right control lever.
•
To Make A Pivot Turn (Ref. Frame #7):
Move one control lever forward and the other
control lever back of neutral, this will allow the drive
wheels to counter-rotate.
Figure 2-7
Front of Mower Faces This Direction
25880
1
2
3
6
7
4
5