Linksys WAP54GX User Manual

Page 26

Advertising
background image

20

Chapter 6: Configuring the Wireless-G Access Point with SRX
Navigating the Utility

Wireless-G Access Point with SRX

Wireless

You will use the Wireless tabs to enter a variety of wireless settings for the Access Point.

•

Basic Wireless Settings. Enter the network mode, SSID, and other basic settings on this screen.

•

Wireless Security. Use this screen to configure the Access Point’s wireless security settings.

•

Wireless MAC Filter. From this screen, you can allow access to your wireless network by MAC address.

•

Advanced Wireless Settings. Configure the Access Point’s more advanced wireless settings.

Administration

You will use the Administration tabs to manage the Access Point.

•

Management. This screen allows you to customize the password settings, as well as back up or restore the
Access Point’s configuration file.

•

Log. Configure the Log settings for the Access Point on this screen.

•

Factory Defaults. Use this screen to reset the Access Point to its factory default settings.

•

Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.

Status

You will be able to view status information for your local and wireless network.

•

Local Network. This screen will display current information on the Access Point and its local network.

•

Wireless Network. This screen will display current information on the Access Point and its wireless network.

firmware: the programming code that runs a
networking device.

Advertising