Lenmar Enterprises Lenmar Dual Auto Charger 2X USB AIDCU2 User Manual
Lenmar Enterprises Players
Dual Auto Charger 2X USB
PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT
OPERATING INSTRUCTIONS FOR YOUR UNIT.
Thank you for purchasing the Dual Auto Charger 2X USB, Lenmar’s 12V DC Car Adapter with dual 5V DC
USB Ports. The AIDCU2 has dual 5V DC USB ports to power and charge two devices simultaneously.
The AIDCU2 is able to charge one Apple iPad® or any other two devices simultaneously, such as mobile
phones, PDAs, GPS units and MP3 players from your car’s cigarette lighter socket.
If the blue LED fails to light, please check the fuse located on the side of the unit. Other than the fuse, there are
no user serviceable parts.
The AIDCU2 may shut off due to an excessive current draw. Unplug it from the DC socket the AIDCU2 will reset
itself and function properly.
• Keep the AIDCU2 dry; if it gets wet wipe dry immediately.
• Use and store the unit in normal temperature environments.
• Use only inside your motor vehicle.
• Handle the AIDCU2 carefully; avoid dropping onto hard surfaces.
• Do not use the AIDCU2 when the vehicle battery is low.
• Do not use the AIDCU2 if it becomes damaged. Keep the AIDCU2 away from dust and dirt; wipe it with a cloth
occasionally to keep it clean. Other than the fuse there are no user serviceable parts. Modifying or
tampering with its internal components can cause a malfunction and will invalidate the warranty. If your
AIDCU2 is not operating as it should during the warranty period, contact Lenmar for warranty service.
Operating your Dual Auto Charger 2X USB
Remove the cigarette lighter from the socket in the car. Plug the AIDCU2 into the cigarette lighter socket.
Once plugged into the car’s cigarette lighter socket you will see the blue LED light on the front of the
AIDCU2; this confirms the unit has power and is connected properly. Insert your device’s existing USB cable
into one of the available USB sockets, plug your device into the other end and it will begin receiving power.
The AIDCU2 is equipped with a 2A automotive type fuse to protect from an overload. This prevents unsafe
excessive power usage or a short circuit from damaging your car’s electrical system. To replace, pull the fuse
straight out of the side of the AIDCU2 and insert a new fuse in its place.
*Please note that many new vehicles do not supply power to the cigarette lighter socket unless the key is on.
If the blue LED does not come on with the key in the off position, turn the key on and verify that the LED
Input: 12-18V DC / 1A
Output: 5V DC 2100mAh max, compatible with most electronic devices
Fuse: 2A replaceable fuse
Blue LED indicator light indicates power on
Dimensions: 25.5 x 68.5mm
312-150-35-0511 r1.1 y1
Port A: Charges iPad and other devices
Port B: Charges mobile devices
Note: BlackBerry® smartphones must be charged here only.
Limited 1 Year Warranty
Lenmar product is warranted to be free of defective parts and workmanship for stated period from the original
date of purchase when sold through our website or our authorized retailers. Warranties are not transferable. The
warranty excludes damage resulting from accident, misuse, modification, delay or loss of use, damage to
equipment or by normal wear and tear.
ALL WARRANTY CLAIMS ARE PROCESSED ONLINE AT THE FOLLOWING LINK:
Warranty claims made after 60 days from the original date of purchase, will require a processing fee. Details will
be included while completing the online warranty request. Payment can be made via credit card when
completing the warranty form or a check can be included with the package when it is returned to Lenmar. Once
the request is completed, you will be emailed with a confirmation WRA number and instructions on how to
return the item for a warranty replacement.
For additional questions, comments, or to explore other Lenmar power solutions,
visit our website at: www.lenmar.com or call 800.424.2703 from 9AM – 5PM PST.