Linksys WAG54G User Manual

Page 21

Advertising
background image

14

Chapter 5: Configuring the Gateway
Overview

Wireless-G ADSL Gateway

•

VPN. To enable or disable IPSec and/or PPTP Pass-through, and set up VPN tunnels, use this screen.

Access Restrictions

•

Internet Access. This screen allows you to prevent or permit only certain users from attaching to your
network.

Applications & Gaming

•

Single Port Forwarding. Use this screen to set up common services or applications on your network.

•

Port Range Forwarding. To set up public services or other specialized Internet applications on your network,
click this tab.

•

Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.

•

DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.

Administration

•

Management. On this screen, alter Gateway access privileges, SNMP, and UPnP settings.

•

Reporting. If you want to view or save activity logs, click this tab.

•

Diagnostics. Use this screen to do a Ping Test.

•

Factory Defaults. If you want to restore the Gateway’s factory defaults, use this screen.

•

Firmware Upgrade. Click this tab if you want to upgrade the Gateway’s firmware.

Status

•

Gateway. This screen provides status information about the Gateway.

•

Local Network. This provides status information about the local network.

•

Wireless. This screen provides status information about the wireless network.

•

DSL Connection. This screen provides status information about the DSL connection.

Advertising