Link electronic High Definition Closed Caption Encoder HDE-3000 - Manual (Page 2)

STATUS SCREEN
A status screen is displayed on the VGA monitor or
HDE-3000 Remote terminal whenever the HDE-3000
is in “run” mode (as opposed to “setup” mode).
The status screen displays several useful items as
shown above.
Many aspects of the HDE-3000 may be customized
by way of user settings. Settings are made from the
front panel, or they may be done via a network. The
HDE-3000 stores all current settings on its hard drive
in a registry file
The dual encoder system, model HDE-3000/2 contains two HDEenc encode/decode cards. The dual encoder
system allows several features, such as;
A. Run two jobs simultaneously
B. NTSC on one card
C. PAL on the second card
D. Closed caption on one card
E. Open caption on the second card
F. SD & HD Captioning Simultaneously
G. Two Different Video Formats Simultaneously
H. Re-insert Captions after format Conversion
I. Re-insert captions after video squeeze
J . Two Indepentant SMPE Time Code Inputs
The HDE-3000/2 contains two encoder cards. This product functions as two independent HDE3000 encoders
inside one chassis. Each independent encoder has its own video and time code connections, and both
encoders run simultaneously. Examples, user can encode an HD feed and an SD feed simultaneously., or
using the second card as a caption decode monitor.
COMMON NAMES ACCEPTS
1080i/60
1080I/59.54
1080I/50
1050P/30
1080P/29.97
1080P/25
1080i/24
1080P/23.98
1080PsF/30
1080PsF/29.97
1080PsF/25
1080PsF/24
1080PsF/23.98
720P/60
720P/59.94
720P/50
720P/30
720P/29.97
720P/25
720P/24
720P/23.98
HDE-3000 & HDE-3000/2, front panels are the same
HDEenc, HD SD SDI Encoder Card
The software automatically detects when it is running on a dual card unit and displays “HDE3000 DUAL Enc x”
in the title line of all of the menus (the “x” is a “1” or a “2” depending on which encoder you have selected).
The two internal encoders share the VGA displays, the front panel buttons, LED’s. and the COM ports.
The COM ports are available to both encoders, and can be cascaded to allow both encoders to use the same
Com Port.
Note Description:
#1, FP Primary Power Switch
#2. Cut a-way showing dual encoders
#3, 2 USB Ports & Reset
#4, LED’s Showing status
#5, Navigation control buttons
#6, AC Power Connector
#7, Secondary Power Switch
#8, Internal Telephone Modem
#9, Serial Port #2
#10, Serial Port #1
#11, Ethernet CAT5
#12, VGA Connector
#13, Keyboard & Mouse
#14, LTC Time Code
#15, HD SD SDI Out
#16, Signal Power By-Pass
#17, Main HD SD SDI Input
LINK
ELECTRONICS, INC. ‹ 2137 Rust Avenue ‹ Cape Girardeau, MO 63703-7668
Phone 573 334 4433 ‹ FAX 573 334 9255
Rear Section Showing Dual Encoders
#2
#1
#4
#3
#5
#8
#17
#6
#14
#15
#16
#9
#13
#7
#10
#11
#12