Lowel Light LOWEL CASELITE 2 - Manual

Opening the Unit 2
Stand Mounting 2
Tilting & Pointing 2
Controlling Light Intensity 3
Fuse Change 3
Lamps & Lamp Changes 3
Light Controls 4
Barndoor/Intensifiers 4
Egg Crates 4
Gel Clips 4
Closing/Transporting 4
Problems, Repairs & 4
Lowel Caselite ® Instructions
The Lowel Caselite is a profes-
sional lighting system. Read
these instructions and lamp man-
ufacturers’ warnings before oper-
ating.
n Do not leave Caselite unattended.
For non-stationary (portable
location) use.
n Not for household use. Use only
for photo graphic lighting (video &
film imaging).
n Do not exceed maximum rated
wattage for unit.
n Use maximum 55 Watt lamps.
n Always unplug unit before relamping.
n Be sure lamp is securely seated
in lamp socket.
n Do not use near standing water.
n Internal ballast produces high
start-up voltage.
n Never bypass plug’s ground pin.
n Do not interfere with unit’s
ventilation.
n When attaching to overhead pipes
or grids, always use a Safety Cable.
n Do not attempt to open unit,
no user serviceable parts inside.
See p. 3 for fuse change.
n This is a portable location light.
It complies with UL 1573 for still
photographic lights when used with
the supplied T1-80 cable. For use as
a portable stage lighting unit use
with Lowel T1-808 10’ unswitched
cable rated for ‘hard service’.
Fluorescent Warnings
n Avoid looking directly at the tubes
for extended periods of time.
n Fluorescent tubes contain highly
poisonous mercury.
n In the event of lamp breakage,
avoid contact with broken pieces.
n Read lamp manufacturers
information fully.
LOWELCASELITE 4
&
LOWELCASELITE 2
Caselite 4
Uses 4 lamps
Caselite 2 Uses 2 lamps
General Warnings Contents