LG 19LH20R - Manual (Page 119)

APPENDIX
119
0 01 1.. P Po ow weerr ((C Co om mm maan nd d:: kk aa))
To control Power On/Off of the TV.
Data 00 : Power Off Data 01 : Power On
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Acknowledgement [a][ ][Set ID][ ][ OK/NG][Data][x]
To show Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
* If there is the time delay between command and
ack message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing com-
pletion. There might be a time delay between com-
mand and acknowledge.”
Acknowledgement [a][ ][Set ID][ ][ OK/NG][Data][x]
0 03 3.. SSccrreeeenn M Muuttee ((C Co om mm maannd d:: kk d d))
To select screen mute on/off.
Data 00 : Screen mute off (Picture on)
Data 01 : Screen mute on (Picture off)
Data 00 : Video mute off
Data 10 : Video mute on
* In case of Video mute on only, TV will display
On Screen Display(OSD). But, in case of Screen
mute on, TV will not display OSD.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Acknowledgement [d][ ][Set ID][ ][ OK/NG][Data][x]
0 04 4.. V Vo olluum mee M Muuttee ((C Co om mm maannd d:: kk ee))
To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Data 00 : Volume mute on (Volume off)
Data 01 : Volume mute off (Volume on)
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Acknowledgement [e][ ][Set ID][ ][ OK/NG][Data][x]
0 05 5.. V Vo olluum mee C Co onnttrro oll ((C Co om mm maannd d:: kk ff))
To adjust volume.
You can also adjust volume with the volume buttons
on remote control.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping’.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Acknowledgement [f][ ][Set ID][ ][ OK/NG][Data][x]
0 06 6.. C Co onnttrraasstt ((C Co om mm maannd d:: kk gg))
To adjust screen contrast.
You can also adjust contrast in the Picture menu.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping’.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Acknowledgement [g][ ][Set ID][ ][ OK][Data][x]
0 07 7.. B Brriigghhttnneessss ((C Co om mm maannd d:: kk hh))
To adjust screen brightness.
You can also adjust brightness in the Picture menu.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping’.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Acknowledgement [h][ ][Set ID][ ][ OK/NG][Data][x]
0 02 2.. A Assp peecctt R Raattiio o ((C Co om mm maannd d:: kk cc))
To adjust the screen format. (Main picture format)
You can adjust the screen format using the Aspect
Ratio in the Picture menu.
Data 01: 4:3
02: 16:9
09: Just Scan
04: Zoom
10: Cinema Zoom1
1F: Cinema Zoom16
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][ OK/NG][Data][x]
* Using the RGB input, you select either 16:9 or 4:3
screen aspect ratio.
* Just Scan operates only in
Component/HDMI(720p/1080i/1080p) input source.
0 08 8.. C Co ollo orr ((C Co om mm maannd d:: kk ii))
To adjust the screen color.
You can also adjust color in the Picture menu.
Data Min : 00 ~ Max : 64
Refer to ‘Real data mapping’.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Acknowledgement [i][ ][Set ID][ ][ OK/NG][Data][x]
0 09 9.. T Tiinntt ((C Co om mm maannd d:: kk jj))
To adjust the screen tint.
You can also adjust tint in the Picture menu.
Data Red : 00 ~ Green : 64
Refer to ‘Real data mapping’.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Acknowledgement [j][ ][Set ID][ ][ OK/NG][Data][x]
MFL58486305-Edit4-en 5/29/09 1:12 PM Page 119