Lanier CW2200SP - Manual (Page 113)

CPT015
6. Make sure the edge of the paper feeds out of the machine.
If the paper does not come out, press the button for at least a second and then release it so that the
paper feeds out.
7. Hold both flanges and place the paper roll on the flat place in front of the bearing.
CPT016
1 1
1. Bearing
8. Grip the flanges again, and then remove it from the paper input location.
9. Place the paper roll on a flat surface.
10. Raise the lock lever on the left flange.
CPT017
Loading Paper into the Paper Input Location
111