Life Fitness M051-00K61-A039 User Manual

How to... install avk leg leveler retainer, Life fitness rear drive cross-trainers

Advertising
background image

M051-00K61-A039

Life Fitness Rear Drive Cross-Trainers

How To... Install AVK Leg Leveler Retainer

Tools Required:

Screwdriver, Open end wrench

Service Kit GK61-00002-0038

1. Raise and support the front end of the Cross-Trainer

to access the LEG LEVELERS.

2. Remove the LEG LEVELERS.

3. Carefully remove the existing AVKs (nut inserts).

NOTE: Do not leave loose AVKs in the frame tube.

4. Install the new LEG LEVELER RETAINER with the

radius cut facing up and outward as shown.

5. Align the bolt hole in the LEG LEVELER RETAINER

with the bolt hole in the FRAME TUBE.

6. With the JAM NUT in place, screw the LEG

LEVELER into the LEG LEVELER RETAINER.

7. Remove the support from the front end of the unit.

8. Stabilize the front of the unit and secure THE LEG

LEVELER positions by tightening THE LEG
LEVELER JAM NUTS against the FRAME TUBE.

9. Reinstall the END CAPS.

End
Cap

Leg Leveler

Leg Leveler
Retainer

Frame

Jam Nut

Radius cut faces
up and outward
towards end cap

Bulletin

Advertising