Lexicon MPX 100 - Manual (Page 17)

14
Variation State when Edit LED is:
Setting Parameter On Off
1 Bypass Mute Bypass*
2 Patching Disabled Enabled*
3 Program Load Mute Bypass*
4 Digital Output Dry Wet*
5 MIDI OUT/THRU Out* Thru
6 MIDI Pgm Change Disabled Enabled*
7 MIDI Clock Receive Disabled Enabled*
8 Tempo Program* Global
MIDI Dumps (Press Store to Transmit)
14 Dump User Programs
15 Dump Current Program
16 Dump System and Learned patches
Press and hold Bypass
for 2 seconds...
...The Bypass and Store
LEDs will blink slowly to
indicate you are in
System mode.
Turn VARIATION to select a parameter.
System
parameters
MIDI
Dumps
Press Store to
toggle the
parameter state
(or to execute a
MIDI dump).
System Mode Parameters
Turn VARIATION until the Tap LED goes on
to find the last loaded program...then press
Bypass to exit System Mode.
* Factory Default