Lenoxx Electronics CD85 - Manual (Page 8)

IB-CD85(21A-60C9)-WM-E-010603
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Programming Example:
Program Number 1 2 3 4 5 6 7 8
Track Number (song number) 3 5 8 1 2 4 1 1
etc.
etc.
PROGRAMMED PLAY
During programming, the word PROG flashes in the display. To program songs to play
in your preferred order, follow steps below:
1.Press the PROGRAM button.
The word PROG and “ ” will flash in
the display.
2.Press the SKIP/SEARCH button ( or
) to select track number 3 (example).
PROG and track number “03” will flash in
the displa y.
3.Press the PROGRAM button to confirm.
Track 3 is now programmed.
Program number 2 will now show in the
display, ready for your next selection of
track.
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 20
selections).
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press the
STOP button once. Then you may press
the PLAY button to re-start normal play.
Your programmed number will be
lost:
• When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
•
When the power is shut off.
SKIP/SEARCH
Program number
Track number
PROG
7
PROGRAM
5.After programming is finished, press
the PLAY button to begin programmed
play. The word PROG changes to be
steady on in the display, and music
begins to play in the order you
programmed.
IB-CD85(21A-60C8)-WM-E-010603.p65 1/13/03, 12:20 PM 8