Lenoxx Electronics CR-777 - Manual (Page 5)

IB-CR777(NL)-WM-E-020504 4
GETTING BETTER RADIO RECEPTION:
For best AM reception, rotate the radio a small amount or position it
near the window.
For best FM reception, unwrap and fully extend the FM antenna wire.
WARNING: Do not connect the FM antenna to an outdoor antenna.
Playing the Radio
1. Slide the FUNCTION switch to ON position.
2. Slide the BAND switch to either AM or FM.
3. Turn the TUNING control to your desired station.
4. Adjust the VOLUME control to your favorite listening level.
5. Slide the FUNCTION switch to OFF position to shut off the radio.
Waking up to Radio (Alarm)
1. Set the alarm time as previously instructed and slide the ALARM
SET button to ALARM 1, ALARM 2 or ALARM 1+2.
2. Select your desired AM or FM broadcast by following the procedure
of Playing the Radio.
3. Make sure the VOLUME control is set loud enough to wake you up.
4. Slide the FUNCTION switch to AUTO position and the ALARM 1,
or ALARM 2 or both indicators will light up (depending on what you
select on step 1).
NOTE: Your set is now ready to turn on automatically at your
selected alarm time(s).
5. When alarm sounds, to get 7 minutes of extra sleep, press the
SNOOZE button.
6. To shut off the alarm, press ALARM/SLEEP OFF button.
OPERATING INSTRUCTIONS
Setting the Alarm Times
This set has dual alarms. You may set ALARM 1 to wake you at a certain
time, or ALARM 2 to wake you at a different time, or ALARM 1+2 - both
alarms will sound at the times you set.
This feature is useful for a husband & wife waking up at different times
or a single person who likes to wake up at different times during week
days or weekends.
To set ALARM 1, slide the ALARM SET switch to position 1.
5. Release the ALARM button, the clock display will show the normal
time of day. Press the alarm button to display the alarm time.
To set ALARM 2, slide the ALARM SET switch to position 2.
1. Use the ALARM button to check the alarm time.
2. Press and hold the ALARM button together with the FORWARD button
until the display shows the desired alarm hour time.
3. Press and hold the ALARM button together with the REVERSE button
until the display shows the correct alarm minutes.
4. Make sure the PM lamp is off if you want the clock to wake you in the
morning.
NOTE 1:Again check the PM indicator. If you want the radio to
wake you in the morning, the lamp above to PM should
be off on alarm time (when pressing ALARM button). To change
PM to AM time, advance time 12 hours.
NOTE 2: To wake to ALARM 1 time, slide ALARM SET switch to position 1.
To wake to ALARM 2 time, slide ALARM SET switch to position 2.
To wake to both times, slide ALARM SET switch to position 1+2.
IB-CR777(NL)-WM-E-020504.p65 3/9/2004, 6:42 PM 5