Troubleshooting & repair, Chopper board assembly removal and replacement, Warning – Lincoln Electric POWER MIG SVM160-B User Manual
Page 87
CHOPPER BOARD ASSEMBLY REMOVAL
AND REPLACEMENT
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical troubleshoot-
ing assistance before you proceed. Call 1-800-833-9353 (WELD).
DESCRIPTION
The following procedure will aid the technician in the removal and replacement of the Chopper
Board assembly. The assembly is replaced as a unit; there are no serviceable parts.
MATERIALS NEEDED
5/16 in. Nutdriver
3/8 in. Nutdriver or wrench
7/16 in. Open end wrench
1/2 in. Open end wrench
1/2 in. Socket wrench, universal tool, and extension
3/8 in. Nutdriver
3/8 in. Open end wrench
Diagonal cutters
Wiring Diagram
TROUBLESHOOTING & REPAIR
F-43
F-43
POWER MIG 300
WARNING