Laser AO-BTHD - Manual (Page 5)

AO-BTHD
USER MANUAL
5
WHAT’S IN THE BOX
1 x Bluetooth headset AO-BTHD
1 x Mini USB charge cable
1 x User manual
2 x Spare foam ear pads
1 x Carry case
CHARGING THE AO-BTHD
It is recommended to thoroughly charge this device before first use.
Subsequent charges may be as required.
Charging via USB cable
• Ensure the AO-BTHD is turned off before charging
• Connect the included USB cable into the mini USB port on the headphones.
• Connect the other end of the USB cable to a USB power adapter, an in car 12vDC to USB
adaptor, a PC or notebook USB port or any other device which can supply power via
USB (5volts)
• When the red LED light is on, the headset is charging
• When the blue LED light is on, the headset is fully charged
• It should take around 3 hours to fully charge the AO-BTHD (if connected to a PC which
has a sleep/hibernate function, the device will not charge)
SWITCH ON /OFF THE AO-BTHD
Function Operation LED indicator Indication tone
Switch on
Press the MFB button for 3
seconds, until the blue LED is on
Blue LED blink 3 times. 2 x audible tones
Switch off
Press the MFB button for 5
seconds, until the red LED is on
Red LED blink 3 times 3 x audible tones