La Crosse Technology WS-8055U - Manual (Page 7)

7
VI) CALENDAR SETTING
Note: When the WWVB signal is found, that date will over-ride the manually set
date.
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press the “SET” button 5 more times, until the default year “00”
flashes in the date LCD.
2) Press the “+” button to select the year.
3) Press the “SET” button to confirm the year, and to set the month.
4) The default month “1” will flash. Press the “+” button to select the
appropriate month.
5) Press the “SET” button to confirm the month, and to set the date.
6) The default date “1” will flash. Press the “+” button to select the
appropriate date.
7) Press the “SET” button to confirm the date, and to set the weekday.
8) The default weekday “MON” (depends on selected language) will flash.
Press the “+” button to select the appropriate weekday.
9) Press the “SET” button to confirm the calendar settings, and to advance to
select either 12 or 24-hour time display.
VII) 12/24-HOUR SETTING
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press the “SET” button 9 more times, until the “12” hour time
display flashes in the time LCD.
2) Press the “+” button to toggle between 12 and 24 hour time.
3) Press the “SET” button to confirm the 12/24-hour time display, and to
advance to select either
°F or °C.
VIII) SELECTING
°F OR °C
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press the “SET” button 10 more times, until the default “
°F” flashes
in the time LCD.
2) Press the “+” button to toggle between
°F and °C.
3) Press the “SET” button to confirm the
°F or °C selection, and exit the
Program Mode.