Land Pride RC45180 - Manual (Page 3)

1
Important Safety Information
7/14/08 RC45180 & RCM45180 Rotary Cutter 312-382M
Land Pride
Table of Contents
Important Safety Information
!
!
CAUTION!
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may
also be used to alert against unsafe practices
Safety Rules
Most accidents are the result of negligence and careless-
ness, usually caused by failure of the operator to follow
safety precautions. The following precautions are manda-
tory to prevent such accidents. Your implement has been
designed with built-in safety features.
Make sure everyone that uses this machine has read the
Operator’s Manual and understands how to operate it
safely.
This Operator’s Manual is considered a part of the imple-
ment and should remain so when loaned or sold.
These rules and instructions
must be reviewed at least annually
by all operators!
For your safety and to develop a better understanding of
your equipment, thoroughly read the Operator’s Sections
of this manual before operation.
Safety Notations
The SAFETY ALERT SYMBOL indicates that there is a
potential hazard to personal safety involved and extra
safety precautions must be taken. When you see this sym-
bol, be alert and carefully read the message that follows it.
In addition to design and configuration of equipment; haz-
ard control and accident prevention are dependent upon
the awareness, concern, prudence and proper training of
personnel involved in the operation, transport, mainte-
nance and storage of equipment.
Watch for the following Safety Notations throughout
your Operator’s Manual:
!
DANGER!
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury. This signal
word is limited to the most extreme situations.
!
WARNING!
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
!