How ub-521 works before you start – LifeSource Bilingual Instruction Guide UB-521 User Manual

Page 8

Advertising
background image

LifeSource Health Line (Toll-Free): 1-888-726-9966

E-4

The UB-521 provides accurate readings on wrists with a circumference

between 5.3" and 8.5" (13.5 cm and 21.5 cm).
The unit requires two "AAA" (1.5 volt) batteries to operate (alkaline

batteries recommended). To install batteries (or to replace when "Low

Battery" symbol appears), proceed as follows:

1 .

Slide the battery cover as shown to remove from the device.

2 .

Insert batteries into designated areas ensuring a correct match with

positive (+) and negative (-) terminals.

3 .

Return battery cover by sliding back on to monitoring device.

NOTE: Rechargeable batteries will not work with this monitor.

HOW UB-521 WORKS

BEFORE YOU START

LifeSource

®

Blood Pressure Monitors are easy to use, accurate and display

clear digital measurements. Our technology is based on the “oscillometric

method”. The term “oscillation” refers to the measure of vibrations caused

by the arterial pulse and is a non-invasive method to determine blood

pressure.
Our monitors examine the pulsatile pressure generated by the arterial wall

as it expands and contracts with each heartbeat against the monitor’s cuff.

This monitor measures your blood pressure while the cuff is inflating.

Advertising