La Crosse Technology Radio Controlled Moon Phase Clock WS-8001U - Manual (Page 7)

7
6) The default date “1” will flash. Press the “+” button to select the
appropriate date.
7) Press the “SET” button to confirm the date, and to set the weekday.
8) The default weekday “MON” (depends on selected language) will flash.
Press the “+” button to select the appropriate weekday.
9) Press the “SET” button to confirm the calendar settings, and to advance to
select either 12 or 24-hour time display.
VII) 12/24-HOUR SETTING
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press the “SET” button 9 more times, until the “12” hour time
display flashes in the time LCD.
2) Press the “+” button to toggle between 12 and 24 hour time.
3) Press the “SET” button to confirm the 12/24-hour time display, and to
advance to select either
°F or °C.
VIII) SELECTING
°F OR °C
1) Hold down the “SET” button for 2 seconds (the selected time zone will
flash), press the “SET” button 10 more times, until the default “
°F” flashes
in the time LCD.
2) Press the “+” button to toggle between
°F and °C.
3) Press the “SET” button to confirm the
°F or °C selection, and exit the
Program Mode.
FEATURES & OPERATIONS
I) CHANGING DISPLAY MODE (DAY, SECONDS, AND TEMPERATURE)
There are three possible display modes to view the day, seconds, and temperature.
The month&date/weekday/moon phase/indoor temperature is the default.
To change the display:
1) Press the “+” button. The display should now show the
month&date/weekday/moon phase/seconds.
2) Press the “+” button a second time and the display will now show the
month&date/seconds/moon phase/indoor temperature.
3) Press the “+” button a third time and the display will return to the normal
display.
II) THE ALARM
A) SETTING THE ALARM
Note: The duration of the alarm is 85 seconds. After each of the first two 25