Technical specifications – Lucent Technologies Lucent Compact Switch User Manual

Page 2

Advertising
background image

To learn more about our
comprehensive portfolio, please
contact your Lucent Technologies
Sales Representative or:

Call 1 888 4 Lucent

SM

Visit our web site at
www.lucent.com.

This document is for planning purposes
only, and is not intended to modify or
supplement any Lucent Technologies
specifications or warranties relating to
these products or services. The
publication of this information in this
document does not imply freedom from
patent or other protective rights of
Lucent Technologies or others.
Specifications are subject to change
without notice.

Copyright © 2005
Lucent Technologies, Inc.
All rights reserved.

Compact Switch v2 08/05

Technical Specifications

1.Protocol Support

IP Protocols: BICC, MEGACO, MGCP, SIP/SIP-T, SigTran, TCP, UDP, RTP, RTCP
SS7 Protocols: ANSI and ITU/ETSI, Q.767, ISUP, TCAP variants, IS-41, GSM
ISDN Protocols: Q.931 PRI, GR-1268 PRI, ETSI PRI
CAS Protocols: FG-D, CAMA MF, line or trunk supervision, DTMF
GR-303 interface
GR-1298/1299 AIN 0.2 compliance
AIN 0.1 for LNP and 800 services

2.Redundancy

1:1 system processor and switch fabric redundancy
1:N I/O module redundancy

3.Call Handling

450,000 BHCA
80,640 TDM DS0 ports, protected
21,504 VoIP DS0 ports, protected
G.711, G.726, G.729a/b, G.723.1, T.38 fax relay, echo cancellation (128 msec tail)

4.On-Switch Database

A high capacity (more than 100,000 subscribers) flexible database to store
subscribers, features, and routing information for both tandem and Class 5
applications

5.Operations

PlexView

®

Element Management System supports provisioning, performance

monitoring, and fault management
Billing: GR-1343 AMA interface, GR-1100 BAF or ASCII CDRs
Order Entry: manual or automated service order execution
Traffic Analysis and Reporting with customized report building
4000 seconds of announcements on-switch
Call Progress Tones on switch
3-way conferencing on-switch
CALEA support on-switch

6.Input/Output Support

28-port DS1, channelized: SF, ESF, B8ZS, AMI
28-port E1 channelized: CRC4, HDB3
3-port DS3/STS-1, channelized: VT1.5 or M13/C-Bit mapped, B3ZS
8-port DS3/STS-1, channelized: VT1.5 or M13/C-Bit mapped B3ZS
Triple OC-3, channelized: VC-1.5 or M13
Triple STM-1 channelized: VC-12
Quad 1000 Mbps Ethernet module with either: quad 1000 base-T, quad 1000 base-
LX, single mode or SX multi-mode interface using standard GBIC modules

7.Physical

24.5” H x 21.5” W x 18” D including cabling
180 lbs, fully loaded
-40 to –56.7 Vdc, 1450 watts fully loaded
NEBS CO and ETSI compliant operating environment
Redundant BITS timing support with internal Stratum 3 sources
CE and UL certified

Advertising