LevelOne FCS-1060 - Manual (Page 39)

39
Preset function area
”Current position”, If the User wants to save the current view as a preset location, enter a name
for each of the current video view at “current position” and click on the “Add” button. The camera
allows for 20 preset locations.
”Preset position” This keeps a list for preset positions. Clicking on the “Delete” button will
remove the current selected position from the preset list.
“Set as home” Click on the button will set the current aimed position as home of the Network
Camera. Each time the Network Camera reboots or after calibration, it will automatically aim to the
defined home position.
“Default home” Restore home position to factory default home by clicking on this button.
”Dwelling time” The value set here specifies:
1. The stop time of each preset location during auto patrol of the Network Camera.
2. The stay time at the most left and the most right positions when the Network Camera is doing
auto panning.
”Patrol selection”, After the User has saved a list of preset positions, the “Preset locations” box
will also keep a list of the preset positions. And once the “Select>” button is clicked, the “Selected
location” box will keep a list of the patrol stops. The “Remove” button removes the preset
position from the patrol stops. The “UP”, “DOWN” buttons adjust the order of the patrol stops.
Several preset positions can be added to the patrol stops. The camera can accept up to 40 patrol
stops.
“Save” button
The button is valid for “Auto pan/patrol speed”, “Enable IR control”, “Dwelling time” and “Patrol
selections”. In other words, after changing these settings, and the “Save” button is not clicked,
the new setting of the camera will not take effect.