Lowrance electronic 480C - Manual (Page 92)

86
Entrance to Chesapeake Bay (left) in a MapCreate 6 custom map,
10-mile zoom. Same position on Navionics chart at 11-mile zoom (cen-
ter) and 5-mile zoom (right).
To display a Navionics chart:
1. Install the Navionics MMC in the memory card compartment and
turn on the unit. (For full card install instructions, see Sec. 2.)
WARNING:
You should never format the MMC containing your
Navionics chart. Formatting the MMC will permanently
erase the chart from the card.
2. From the Map Page, press MENU |
↓ to
M AP D ATA
| ENT |
↓ to
N AVIONICS
M AP C HOICE
| ENT . Use
↑ or ↓ to select the Map Name, then press
ENT | EXIT | EXIT .
These figures show menu sequence (from left to right, after selecting
Map Data command) for choosing a Navionics chart for the Miami area.
3. To turn off a Navionics chart, From the Map Page, press MENU |
↓ to
M
AP
D
ATA
| ENT |
↓ to
N
AVIONICS
M
AP
C
HOICE
| ENT . Use
↑ or ↓ to select
L
OWRANCE
, then press ENT | EXIT | EXIT .