Ow to use washer, Led display, Wash/rinse temperature – LG WD-10587BD User Manual

Page 15: Cycle completion indicator, Status/cycle display, Estimated time remaining, Door lock indicator, Spin speed, Beeper, Soil level

Advertising
background image

15

ow to use washer

H

• Select a water temperature based on the type of

load you are washing.

• Follow the fabric care label and chart below for

best results.

• Warm rinses leave the loads dryer than cold

rinses. Warm rinses increase wrinkling.

• In cold climates, a warm rinse makes the load

more comfortable to handle.

• Cold rinses save energy.

• The Cold rinse temperatures depend on the cold

water at your faucet.

• Warm rinses are regulated at approximately 86°F

(30°C).

• For the Tap Cold/Cold setting, both wash and

rinse temperatures depend on the cold water at
your faucet.

8. Wash/Rinse Temperature

Shows how much of the current wash cycle has
been completed.

3. CYCLE COMPLETION

INDICATOR

This portion of the display shows the selected
cycle, operating status, and special messages.
If a cycle has special instructions, they will also be
displayed in this area.

4. STATUS/CYCLE DISPLAY

When the START/PAUSE button is pressed, the
washer automatically detects the wash load
(weight) and optimizes the washing time, based on
the selected cycle and options. The display will
then indicate the estimated time remaining for the
selected wash cycle.

NOTE:

The cycle time displayed may appear much longer
than that of a top-loading washer.
The displayed time is for the complete cycle, rather
than just the agitation portion of the cycle, as is
typically shown on a top-loading washer.

2. ESTIMATED TIME REMAINING

Indicates that the door is locked. The washer door
will lock while the washer is operating. The door
can be unlocked by pressing the START/PAUSE
button to stop the washer.

1. DOOR LOCK INDICATOR

• To change the spin speed, press the Spin Speed

button repeatedly to cycle through available
options.

• To start Drain/Spin cycle:

1. Press Power ( ) button to turn on.

2. Press Spin Speed button only.

3. Press Start/Pause ( ) button.

9. Spin speed

• Press repeatedly to adjust the volume of the

Beeper.

11. Beeper

• To change the soil level, press the Soil Level

button repeatedly until the desired setting is on.

10. Soil Level

Suggested Wash Temp.

Hot

122°F (50°C)

Warm

104°F (40°C)

Cold

77°F (25°C)

Garment

Whites and Heavy

soiled color-fast items

Most loads

Brightly colored items,

washable woolens

LED DISPLAY

1

2

3

4

Advertising
This manual is related to the following products: