Lincoln Electric POWER MIG 11521 - Manual (Page 70)

WIRE DRIVE MOTOR REMOVAL AND REPLACEMENT PROCEDURE
(continued)
1. Place the new wire drive assembly into its prop-
er position.
2. Connect plug J4.
3. Maneuver assembly back into its original posi-
tion.
4. Replace all mounting screws previously
removed.
5. Using a 3/4” nut driver, replace the thick black
lead previously removed.
6. Reconnect the gas hose to the wire drive
assembly.
7. Close case wrap around cover.
TROUBLESHOOTING AND REPAIR F-32 F-32
Power MIG® 215XT
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Section
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC
Return
to
Master
T
OC