Linksys CIT310 - Manual (Page 21)

Dual Mode Cordless Phone for Yahoo! Messenger with Voice
15 Chapter 3: Get Connected
Connect the USB Base Station
Connect the USB Base Station
The USB cable is connected to the base station. Plug the other end into your PC’s USB port.
To connect the Line and Power cords:
1. If you have regular phone service, connect a telephone line cord (included) to the LINE port of the USB base
station. Then connect the other end to your telephone wall jack.
2. Connect the included power adapter to the power port of the USB base station. Then plug the power adapter
into an electrical outlet.
Proceed to the next section, “Charge the Handset Battery Pack.”
Figure 3-1: Telephone cable
connection
Figure 3-2: Power adapter
connection