Lexicon SDP-40 - Manual (Page 89)

5-15
The MODE ADJUST Menu
SDP-40
dts and dts-ES
• The unit will automatically switch between the dts and dts-ES
listening modes, activating ES decoding when a dts-ES input
type is identified.
dts
• Designed for playback of 5.1-channel dts encoded sources.
• Decodes 5.1 discrete channels from dts encoded input types.
The five main channels are full-frequency. The .1 channel, often
referred to as the LFE or subwoofer channel, has a limited
frequency range of 120Hz.
• Appropriate for dts encoded film sources.
dts-ES
• Designed for playback of 6.1-channel dts-ES encoded sources.
• Decodes 6.1 channels from dts-ES encoded input types. The six
main channels are full-frequency. The surround back
channel can be either discrete or matrix encoded. The
.1 channel, often referred to as the LFE or subwoofer channel,
is filtered above 120Hz.
• Appropriate for dts-ES encoded film sources.
Default
Parameter Value Values
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS See page 5-17 for more information
CUSTOM See page 5-17 for more information
An alphabetical listing of parameter descriptions begins on page 5-20.
dts(-ES) 2-CHANNEL
• Designed for conversion of 5.1 or 6.1-channel dts(-ES) input
types to LOGIC7 encoded 2-channel input types.
• Allows 5.1 or 6.1-channel dts(-ES) sources to be listened to
through the front left and right channels.
• Reproduces the original 5.1 performance through playback of
LOGIC7
listening modes.
• Recommended for recording purposes.
• The unit will automatically activate ES decoding when a dts-ES
input type is identified.
Default
Parameter Value Values
CENTER MIX +0dB -25 to +25dB
SURROUND MIX +0dB -5 to +5dB
CNTR DLY SAMPLES +0 -127 to +127
MASTER LEVEL +0dB -5 to +5db
LFE MIX +0.0dB -10.0 to +0.0dB
SUB L/R LVL +0dB OFF, -30 to +12dB
CUSTOM See page 5-17 for more information
An alphabetical listing of parameter descriptions begins on page 5-20.
2-CHAN MODE ADJUST MODE ADJUST