Linksys KiSS 1600 - Manual (Page 19)

21
Miscellaneous Settings
Screen Saver: Entering this option enables you to set the number
of minutes that the player will remain idle before the screen saver
is activated.
Front Panel Brightness: Enter this option to set the brightness
of the light in the front panel display as well as the two front
buttons.
Firmware Version: This menu displays the version of the
current firmware installed on the player. A Firmware is a software
package that contains performance improvements or new
features, therefore it is recommended that the player always uses
the latest available version.
Firmware Update: If your player has access to the Internet via
either a wired or wireless network connection, you will also be
able to automatically update your firmware from this menu if a
later version exists. Please read the next chapter about how to
update your player
Quick Setup: Enter this option to access the Quick Setup that
guides you through the same basic and easy setup procedure as
when you powered ON the player for the first time.
Reset To Factory Defaults: Resets the player to its default
settings. By selecting this item, you will lose all of the settings
that you have entered.
Linksys is dedicated to improving its products and to ensuring
that you are always able to obtain the latest features and improve-
ments via firmware updates. This section explains how to do this.
Obtaining new firmware with the player connected
If your player is connected to the Internet via a network, obtaining
and installing a new firmware update has never been easier.
To check for updates, simply enter the setup menu by press-
ing SETUP on your remote control, go to the MISCELLANEOUS
SETTINGS section, and select FIRMWARE UPDATE. A message
will appear telling you whether a Firmware update is available. If
new firmware is available, simply follow the steps On-Screen. The
Firmware will automatically download and be written to the KiSS
1600. This step takes a few minutes depending on your connec-
tion. A REBOOT message will appear when the update has been
installed. After you have restarted your player, you will return to
the Quick Setup. Complete the easy steps to start using it again.
Whenever updates are available, they are also posted to the
Linksys website in the support section, so that even when your
player is not connected to the Internet and you have access to
our website from elsewhere, you will still be able to obtain the
latest updates
12
Updating your Player Setup menu
Screensaver
Use this menu to select the period of inactivity before the
screensaver starts. You can also disable it completly by
selecting “Disabled”.
Disabled
60 sec
5 min
30 min
EN