Lincoln Electric AC-225C - Manual (Page 12)

Invertec
®
V160-T
The Invertec ® V160-T is a full function DC TIG inverter intended
for alloy fabrication or critical maintenance work.
Serious DC TIG Arc—Extremely Small Package
• Advanced inverter technology delivers superior TIG performance.
• Selectable Touch Start TIG ® starting or high frequency starting
makes it easy to establish an arc under a variety of conditions.
• Built-in pulsing functions give you greater control
over thin materials.
• Auto-reconnect between 115/230V 50/60Hz input
power eliminates operator error.
• Auto restore fuse protects the machine from
high input currents.
• Integral gas and power connector for simple
torch connections and quick changes
between TIG and stick welding.
• Three-year warranty on parts and labor.
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current /Voltage/Duty Cycle Rated Output (1) Output Range inches (mm) lbs.(kg)
Invertec ® K1845-1 115/1/50/60 90A/13.6V/100% TIG 20A 5-160 Amps DC 13 x 8 x 17
V160-T 20A Branch Circuit 60A/22.4V/100% Stick Max OCV: 48V (330 x 203 x 432) (10.8)
115/1/50/60 110A/14.4V/100% TIG 25A
30A Branch Circuit 80A/23.2V/100% Stick
230/1/50/60 130A/15.2V/100% TIG 25A
30A Branch Circuit 130A/25.2V/100% Stick
Processes
• Stick
• TIG
Output Input
Unit Includes
• 115V Input Cord (10 ft.) & Plug
(NEMA 5-15P).
• 20 Amp Plug (NEMA 5-20P).
• Twist-Mate
™ Torch Adapter for
PTA-9 or -17 one-piece torch.
• Adjustable Shoulder Strap.
• Work Clamp & Cable.
Key Options
• TIG-Mate
™ 17 Air-Cooled TIG
Torch Starter Pack (K2266-1)
• Foot Amptrol ® (K870)
• Hand Amptrol ® (K963-3)
• Fume Extraction System
•
More options at end of section
Literature
E3.105
CC DC 1
PHASE
60
50
Hz
(1) Input amps on 60 Hz input.
Invertec
®
V155-S
The NEW Invertec ® V155-S offers much more than you would expect from a welder this size. It
packs the full punch of a heavyweight professional that you can take to the most demanding job
sites. It features 120/230V auto reconnect operation and can operate from a portable generator.
It can also plug into a 200 ft. (61 m) 230V extension cord so you can weld
just about anywhere. The Invertec
® V155-S is available in two models:
a base unit with stick accessories or a complete Stick/TIG ready to
weld package in an Easy-Store/Easy-Carry Suitcase.
Portable. Professional. Rugged. Affordable.
• Touch Start TIG ® DC operation allows you to strike the arc
easily without high frequency or tungsten contamination.
• Dent resistant case is IP23 rated for outdoor use.
• Fan-As-Needed ™ (F.A.N. ™ ) reduces noise and dust inside
the machine.
• Two stick modes, SOFT and CRISP, provide the right
arc characteristics for different types of electrodes.
• Auto-Adaptive Arc Force ™ minimizes electrode
sticking in the puddle without compromising
arc stability or increased spatter.
• Automatic Hot-Start ™ boosts the current
during starting to make striking an arc easier.
• Three-year warranty on parts and labor.
60
50
Hz
Product Product Input Power Rated Output Input Current @ H x W x D Net Weight
Name Number Voltage/Phase/Hertz Current /Voltage/Duty Cycle Rated Output (1) Output Range inches (mm) lbs.(kg)
Invertec ® K2606-1 120V/1/50/60 75A/23.0V/100% Stick 24.0A 5-155 Amps DC 11.3 x 6.2 x 15.4 14.7
V155-S and 100A/24.0V/30% Stick 33.8A Max. OCV: 75V (288 x 158 x 392) (6.7)
K2605-1 105A/14.2V/100% TIG 21.5A
130A/15.2V/30% TIG 28.8A
230V/1/50/60 75A/23.0V/100% Stick 21.0A
100A/24.0V/30% Stick 31.0A
105A/14.2V/100% TIG 14.1A
130A/15.2V/30% TIG 22.8A
(1) Input amps on 60 Hz input.
Shown: K2606-1
Ready-Pak ® Pkg.
TIG Welders
www.lincolnelectric.com/tig-welders 14
Processes
• Stick • DC TIG
Output Input
TIG Ready-Pak ® Welding
Package (K2606-1) Includes
• Invertec
® V155-S (K2605-1)
• Stick electrode holder & cable,
10 ft. (3.0 m) with Twist-Mate ™ plug
• Work clamp and cable, 10 ft.
(3.0 m) with Twist-Mate ™ plug
• Fully adjustable shoulder strap
• 120/230V input cord [6.6 ft. (2 m)]
with a 120V 15 Amp plug
• Extra 120V 20 Amp plug
• Gas Regulator
• PTA-17V TIG torch with Ultra-Flex
™
cable and Twist-Mate ™ dapter
• PTA-17 TIG Accessory Kit (KP508)
• Easy-Store/Easy-Carry Suitcase
Key Options
• K2275-1 Welding Cart
• K852-25 Twist-Mate
™ Cable
Plug Kit
• K1782-13 PTA-17FV Flex Head
Gas Valve Torch
• K1781-7 PTA-9FV Flex Head
Gas Valve Torch
• More options at end of section
Literature: E2.141
CC DC 1
PHASE