Reversing the door swing, Reversing the door swing –22, Installation instructions – LG 22 User Manual

Page 18: Installing the water line, Plug in the refrigerator, Tools you will need, Cont.), Start the icemaker (cont.), Start the icemaker

Advertising
background image

PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the
wall. Push the refrigerator back to the wall.

11

TOOLS YOU WILL NEED

18

Installation Instructions

5/16

″ Head socket driver

3/4

″ Head socket driver

(a 6-point socket is

recommended)

Phillips screwdriver

Putty knife or

thin-blade screwdriver

Masking tape

INSTALLING THE WATER LINE

(CONT.)

REVERSING THE DOOR SWING

IMPORTANT NOTES

When reversing the door swing:

Read the instructions all the way through before

starting.

Handle parts carefully to avoid scratching paint.

Set screws down by their related parts to avoid using

them in the wrong places.

Provide a non-scratching work surface for the doors.

IMPORTANT:

Once you begin, do not move the

cabinet until door-swing reversal is completed.

These instructions are for changing the hinges from
the right side to the left side—if you ever want to
change the hinges back to the right side, follow these
same instructions and reverse all references to left
and right.

Unplug the refrigerator from its electrical outlet.

Empty all door shelves, including the dairy
compartment.

START THE ICEMAKER (CONT.)

Feeler arm models –

Move the feeler arm to the

ON (down) position. The icemaker will not begin to
operate until it reaches its operating temperature
of (15 F) (-9 C) or below. It will begin operation
automatically if the icemaker feeler arm is in the
ON (down) position.

NOTE:

In lower water pressure conditions, the

water valve may turn on up to 3 times to deliver
enough water to the icemaker.

Feeler Arm in the
STOP (up) position

Feeler Arm in the ON
(down) position

Feeler arm model

START THE ICEMAKER

Power switch models –

Set the icemaker power

switch to the I (on) position. The icemaker will
not begin to operate until it reaches its operating
temperature of 15°F (–9°C) or below. It will then
begin operation automatically if the icemaker
power switch is in the I (on) position, and the
green light will come on.

Icemaker

Feeler Arm

Power
Switch

Green Power
Light

Power switch model

Advertising
This manual is related to the following products:

25