Logicube Omniclone Xi - Manual (Page 9)

INTRODUCTION
Logicube Omniclone Xi™ User’s Manual 3
Using this guide
This user guide is made up of 11 sections:
•
Introduction
•
Getting Started (Fast Start)
•
Cloning Modes and Settings
•
Omnidiagnostics™
•
The Database/Barcode Option
•
Using the USB Port
•
Compact Flash (CF) Drive
•
User-replaceable Hardware
•
Software Loading Instructions
•
Frequently Asked Questions
•
Reference
•
Index
Please read Modules 1. Introduction, and Module 2.
Getting Started before attempting a drive cloning
session. It is recommended that you practice with a
scratch drive to fully appreciate all of the features.
System description
The complete Logicube Omniclone Xi™ system
includes the following:
•
The Logicube Omniclone Xi™ unit.
•
For the OCX2i™, three (3) 68-pin flat ribbon
cables, three (3) drive power cables and three
(3) SATA Cables are provided.
•
For the OCX5i™, six (6) 68-pin flat ribbon
cables, six (6) drive power cables and six (6)
SATA Cables are provided.
•
For the OCXi™, eleven (11) 68-pin flat ribbon
cables, eleven (11) drive power cables and
eleven (11) SATA Cables are provided.