Lennox International Inc. 43558 - Manual (Page 15)

28
28 PROGRAMMING
Step 5 ■ Press again to change to the program temperature. The current
temperature will be flashing.
■ Press to change the temperature.
Step 6 ■ Press again to move to the next program number.
■ Repeat Steps 3 through 5 to change the remaining Weekday programs.
Step 7 ■ Press to change to Weekend programs.
■ Repeat steps 3 through 5 to complete the weekend programs.
■ Press at any time to exit the Program Mode.
■ After 15 seconds, the thermostat will return to normal mode
automatically.
Step 8 ■ Change to the other system, and repeat steps 2 through 7.
program
or
Weekdays
System
AM
Fan
Temp
1 2 3 4
program
Weekends
System
AM
Fan
Temp
1 2 3 4
prog-day
ret-clear
system
Weekday/Weekend Programming (continued)
41653_model43558.pmd
29
29 7-Day Programming
Step 1 ■ Slide Power Switch to ON.
■ Press to select HEAT or COOL to program the corresponding system.
(Auto may be selected, but does not affect the programming steps)
Step 2 ■ Press to enter program mode, display shows weekday programs.
■ Press 2 times to reach the Monday program.
Step 3 ■ The Program hour and AM or PM indicator are flashing. Press to
change the hour.
Step 4 ■ Press again to change to the minute position. The current minute will
be flashing.
■ Press to change the minute.
on off em
system
program
prog-day
Monday
System
AM
Fan
Temp
1 2 3 4
program
Monday
System
AM
Fan
Temp
1 2 3 4
or
or
(continued)
Thursday
System
AM
Fan
Temp
2