Lowrance electronic 5300c User Manual
Page 62
54
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with
Navigate command highlighted for Trail 6. A trail is always converted
to a "route" when you navigate the trail.
On the Map Page, the trail you are navigating is represented by a dot-
ted line that alternates with a flashing solid line. The Navigation Page
will also show the navigated trail as a dotted line. The bearing arrow
on the compass rose points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a trail way-
point, and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press
EXIT
to clear the alarm.
Navigate trail, map views: Driver is northbound heading straight to-
ward trail point 6 (left). Northbound driver has reached point 6 and
has turned west to follow trail (right).
Trail
dotted line
Trail point
Present
position
arrow
North Ï
Figure 3.
Figure 4.
Figure 1.
Figure 2.
www.Busse-Yachtshop.de email: [email protected]