Lowrance electronic AirMap 2000C - Manual (Page 59)

53
To transfer data from AirMap to the MMC: press ENT (for S AVE
.)
To transfer data from the MMC to AirMap: press → to L OAD
| ENT .
3. Saving: A file name box appears. To accept the default name "Data"
for the GPS Data File, press
↓ to
S
AVE
D
ATA
| ENT . If you wish to rename
the file (as in the following example), press ENT to activate the selection
box. Press
↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press ENT |
↓ to
S AVE
| ENT .
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from AirMap's memory onto an MMC.
The unit will display first a progress then a completion message when the
data transfer is finished. To return to the Page view, press
EXIT | EXIT .
4. Loading: There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT to activate the selection box, use
↓ or ↑
to highlight the file, then press ENT to accept the selection. Next, press
↓ to
L OAD
| ENT . The unit will display a completion message when the
data transfer is finished. To return to the Page view, press EXIT | EXIT .
From left to right, these figures show the menu sequence for loading a
GPS Data File from an MMC into AirMap's memory.