Life Fitness M051-00K32-A086 - Manual (Page 2)

2 M051-00K32-A086
Life Fitness LCD Entertainment System
How To Program TV Consoles - continued
To program TVs with remote control consoles:
1. Leave the remote control cable plugged in.
2. Plug the C-SAFE cord into the black 8-pin
connector on the back of the console.
3. Place the 9-volt battery in the programmer.
4. Plug the other end of the C-SAFE cord into
the programmer.
5. The programmer will give this feedback that
the updating procedure is taking place:
a. The green LED will glow steadily.
b. The yellow LED will then glow
steadily.
c. The yellow LED will then begin
flashing.
d. The console software has been
updated when the green LED begins
flashing slowly.
6. Unplug the C-SAFE cord from the programmer.
7. Unplug the C-SAFE cord from the console.
8. Verify that the console’s software version matches the software version on the
programmer. If the console version number is still lower, repeat the procedure.
Coax
Cable
Power
Cable
Tan 10-Pin Connector
(for remote control)
Black 8-pin C-SAFE connector