LevelOne NetCon FBR-1415TX - Manual (Page 12)

12
3.2 Install the Software into Your Computers
Skip this section if you do not want to use the print server function of this product.
Notice: If you are using Windows 2000/XP, please refer to Chapter 5 Printer - 5.3 Configuring on
Windows 2000 and XP Platforms. It is not necessary to setup any program and the print-server can
work.
Step 1: Insert the installation CD-ROM into the CD-ROM drive. The following window
will be shown automatically. If it isn’t, please run “install.exe” on the CD-ROM.
Step 2: Click on the INSTALL USB and Parallel Print Server Software button. Wait until the
following Welcome dialog to appear, and click on the Next button.
Step 3: Select the destination folder and click on the Next button. Then, the setup program will begin
to install the programs into the destination folder .Step 4: When the following window is
displayed, click on the Finish button.