La Crosse Technology 2800 - Manual (Page 9)

P a g e | 9
If you have met these requirements, we’re ready to install the software. There are two parts to installing the Heavy
Weather Pro software:

Installing the Heavy Weather Pro software application.

Installing or connecting the USB communication device to the PC .
INSTALLING THE HEAVY WEATHER PRO SOFTWARE
Locate the Heavy Weather Pro application file (this is the file you downloaded earlier). It is typically named
setup_hw_wv5.exe . Double click the exe file to start the installation process. When the dialog below appears, click
‘Next’.
Click “Next” again to accept the default location for installation.
Note: If you are running a previous 3600 series weather station, install this software to a different
location to avoid device conflict. To change the installation directory, just change the destination folder
name.
Click ‘Next’ again to accept the default name for the Heavy
Weather application.