Lenoxx Electronics CD-104 - Manual (Page 8)

IB-CD104(TA)-FD-E-043002
You can make a program of up to 19
tracks in the order you want them to
be played.
1. Slide the FUNCTION switch to CD position.
2. Press the PROGRAM button. The “PROG.” and
“00” will flash in the display.
3. Press or to select the tracks you want to
program in the order you want.
4. Press the PROGRAM button to confirm.
5. Repeat steps 3 and 4. You can program up to 19
tracks, and the display will show “ ” if you
continue to program.
6. Press to start programmed play. The “PROG.”
will flash in the display.
To check the order of tracks before play
Press the PROGRAM button, the programmed track number appear in the display
automatically every time you press the PROGRAM button.
To change the current program
Just create a new program following the programming procedure.
To cancel Programmed Play
Press the STOP button in programming mode.
7
SELECTING YOUR OWN MUSIC PLAYING ORDER
(Programmed Play)
NOTE: Programming is only done during
stop mode.
PR O G R A M
PROGRAM
PR O G R A M
IB-CD104(TA)-FD-E-043002.p65 5/3/02, 4:06 PM 8