Lightolier Architectural Decorative DSS01 - Manual (Page 2)

DSS01
Decorative, Shielded Step LED
Page 2 of 2
Philips Lightolier
e: [email protected]
t: (508) 679-8131
w: www.lightolier.com
DSS01 May 31, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011. All rights reserved.
Job Information Type:
4 ½"
(114 mm)
2 ¾" (69 mm) 2 ¼" (57 mm)
⅜" (10 mm)
2 ¼"
(57 mm)
2 ¾" (70 mm)
2
3
1
4 ½"
(114 mm)
2 ¾" (69 mm) 2 ¼" (57 mm)
⅜" (10 mm)
2 ¼"
(57 mm)
2 ¾" (70 mm)
2
3
1
4 ½"
(114 mm)
2 ¾" (69 mm) 2 ¼" (57 mm)
⅜" (10 mm)
2 ¼"
(57 mm)
2 ¾" (70 mm)
2
3
1
Features
1. Heat Sink/Driver Housing: Die-cast aluminum.
2. Lens: Injection molded acrylic, developed for optimum
optical output.
3. Face Plate: Die-cast aluminum.
4. Switch Box Mounting Plate: 18ga. C.R.S. zinc plated,
for mounting to a 3 1/2” deep switch box.
Electrical
LED: (1) 4W 3000K white LED. Average expected life,
under normal operating conditions is 50,000 hours with
lumen maintenance of 70% of original light output.
Driver:
Class 2 power supply
Voltage: 120V
Output Wattage: 5 W
Input Current (max): 100 mA
Frequency: 5 0/60 Hz
Output Voltage (VDC): 12 V
Constant Current:
500 mA
Finish
Satin aluminum with protective clear coat.
Matte white powder coat.
Labels
cULus Listed. Suitable for wet locations.
Wall mount only.