LaCie 119 - Manual (Page 16)

6. Troubleshooting
page 16
LaCie 119 Monitor
User’s Manual
Possible Solutions
• Make sure power switch is in ON position.
• Check power cord connections.
• Check if PC system is Plug & Play
• Check if Video Card system is Plug & Play
• Check if D-15 plug pin of video cable is bent
• Make sure monitors drivers are installed.
• Adjust contrast and brightness controls.
• Move electrical devices that may cause interference.
• POWER switch must be ON
• Video card must be snugly fit into position.
• Check cable connection.
• Inspect pins on cable to be sure all are straight.
• Make sure computer is operational by typing the CAPS LOCK key while observing CAPS
LOCK LED. The LED should be operational.
Inspect the video cable to be sure none of the pins are bent.
Adjust pixel frequency (CLOCK) and FOCUS or press hot-key (AUTO-key).
Adjust RGB color or select color temperature.
The Problem
Power LED not on
No Plug & Play
Fuzzy Picture
Picture bounces of there is
a wave pattern
The POWER LED is on but
there is no video or
picture,
Missing RED, GREEN or
BLUE
Screen Image not
centered
Picture has defects, for
example white does not
look white.
6. Troubleshooting