Lenoxx Electronics CT-995 - Manual (Page 5)

IB-CT995(FTA)-WM-E-011004
CHOOSING THE POWER SOURCES
You can use the AC power or batteries as a power source.
4
To a wall outlet
NOTE: One blade of plug
& outlet is wider.
NOTE
To install the batteries
properly into the compartment,
first place the AC plug into the
slot, then fold the excess cord
carefully into the battery
compartment. Then install
batteries.
C C C C
TIP
The plug of the AC power cord
is polarized and only fits one
way into the wall outlet. If this
plug does not match your
outlet, do not force it. Reverse
it and try again.
1. Connecting the AC Power Cord
Open the BATTERY COMPARTMENT DOOR, stretch the
AC power cord out, and insert the AC PLUG into the wall
outlet.
2. Operate the Set on Batteries
Insert 4 size “C” batteries (not included) into the battery
compartment.
BATTERY DOOR
Battery compartment
C C C C
REMOVE THE BATTERY DOOR
REPLACE THE DOOR AFTER
INSTALLING BATTERIES
IB-CT995(FTA)-WM-E-011004.p65 2/18/04, 7:29 PM 5