La Crosse Technology TEMPERATURE STATION WS-7034U - Manual (Page 9)

9
1. Press and hold the
“SET” button for 5
second, “12h” will
appear in the TIME
LCD.
2. Press and release the “MIN/MAX”
button to select either 12h time
(am/pm) or 24h time
3. Press and release the “SET” button 2
times, the hour will flash in the upper
left corner.
4. Press and release the “MIN/MAX”
button to set the hours
5. Press and release the “SET” button to
move to the minute setting
6. Press and release the “MIN/MAX”
button to set the minutes.
7. Press and release the “SET” button to
activate the clock.
Note: When in 12h mode, there is only a
“PM” display, which appears under “TIME.”
If there is no display here it is AM. Make
sure you set the time accordingly.