Linksys PPS1UW - Manual (Page 19)

31
Click the SNMP tab to view or change the SNMP settings of the Wireless-
Ready PrintServer.
The PrintServer supports SNMP (Simple Network Management Protocol).
This allows network supervisors to monitor and control the PrintServer using
network management platforms such as HP OpenView, IBM SystemView, etc.
The appropriate MIB file must be imported into your SNMP management pro-
gram using the Import-Compile command. Check your management program
for details on this procedure. The MIB file is provided in the Mib folder on the
CD-ROM. The name of the file is Mib1p.mib.
The SNMP Page
EtherFast ® Wireless-Ready USB PrintServer
Click the NetBEUI tab to view or change the NetBEUI connection settings of
the PrintServer.
Enter the name of the domain that you want the PrintServer associated with in
the Domain Name field. If you are unsure of the Domain Name, you can find
it out by looking on any computer already on the network. In Windows 95, 98
and NT, right click Network Neighborhood and select Properties. Under the
Identification tab, there will be listed that computer’s name, and the Domain to
which it is connected. For Windows Millennium and 2000, right click My
Network Places. In Windows Millennium, choose Properties from the menu
that appears. In Windows 2000 or XP, choose Properties from the menu that
appears. Then, right click Local Area Connection and choose Properties. The
Domain name will appear. If you want the PrintServer to be connected to that
same Domain, enter that Domain name here. If no Domain name exists there,
you will use the Workgroup name from that window.
Under Options, you can also specify the Response Time that you prefer for the
PrintServer. This is the amount of time (measured in seconds) that the
PrintServer will wait for a response from the network before “timing out.”
You also have the option to Abort Print Job if Error. Selecting Yes here will
terminate the printing if there is an error of any kind. If you select No, print
jobs that have errors will be sent to the printer, but might not print properly.
If you make any mistakes prior to saving, you can simply hit the Cancel button,
to exit the screen without making any changes. Once you are certain of any
changes you have made, click the Save button to implement the changes.
The NetBEUI Page
32
Instant EtherFast ® Series
Note: Linksys does not provide technical support for SNMP man-
agement.
Figure 7-4
Figure 7-5
Note: Linksys does not provide technical support for the NetBEUI
protocol.