Operating modes – tv, Call additional functions, Call timer overview – Loewe LCD screen TV ConceptL32 User Manual

Page 19: Select picture format, Move picture up/down, Tv menu

Advertising
background image

19 -

Operating modes – TV

Call additional functions

Select additional functions such as Teletext subtitles, Personal
teletext pages, Headphone volume, Scan stations and to move
the picture up and down.

Call timer overview

If timer recordings have been programmed, you will see when
which station is recorded here.

Select picture format

The TV set sets the best picture format automatically when
Auto format is switched on. If you want to set a different
format, press this button until the desired format is selected or
select the format with 34.

You can switch the panorama picture over to distortion-free representation on
your TV set. Dark margins are then visible on the left and right of the picture.
Switching over: Keep the button on the set pressed, at the same time press
the ”Picture format”

button on the remote control briefly.

Resetting: Press the same button combination again.

Move picture up/down

To make picture subtitles visible, you can use56to move
the picture up or down with the picture formats “Panorama“,
“Cinema“ and “Zoom“.

Note: for DVB-T stations in GB you can switch back and forth quickly between
two stations using this button.

TV menu

Call up the TV menu

You will find a description of the picture and sound settings on page 17. The TV
menu offers other options for recording, connections and settings of the TV set.

For a recorder that is logged in, you can find the following

menus in the “Recording“:

Recording wizard - to programme new timer recordings
• Via EPG • Via teletext • Manual
You will find further information about timer recording on page 30.
Timer list
Here you will find a list of programmes programmed for recording. You can
change the recording data or delete programmed recordings and programme
new recordings.
Pre-record time and Post record time
For recordings without VPS/PDC, set a lead and lag time here so that the pro-
gramme is fully recorded despite any slight differences in the time.

Under “Connections“ you will find the following functions:

New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment such
as video recorders, DVD players/recorders, camcorders/digital cameras, pay TV
decoders, equipment with component signals and digital HDMI/DVI signals.
Antenna DVB (only for sets with DVB)
• Antenna DVB-T • Antenna DVB-S

(1

You can find more information on pages 11 and 12.
Digital Link Plus
Transmission of the station data from the TV set to the video/DVD recorder if a
recorder with Digital Link Plus is connected.
Miscellaneous (connections)
• Set AV norm for the connections manually (if it is not recognised automati-

cally).

• “Assign audio digital signals“ to one of the AV sockets.
• “Allow switching voltage“ to display the signals of the connected device

immediately on the screen via Euro AV during playback.

• RGB insertions at AV to play back RGB signals at all station storage locations.
• Select decoder stations and set sound encoding.

(1

only for sets with DVB-S

Teletext subtitles

Personal teletext pages

Headphone volume

Additional functions

OK

INFO

END

Zoom

Cinema

Panorama

16:9

Picture format

4:3

END

Timer list

Fri 12.09./14:12

12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d

Detail

New recording

Change

Delete

TEXT

INFO

OK

Picture adjustment ...

INFO

END

Settings

Connections

Recording

Sound

TV menu

Picture

Picture
Here you can adjust among other things: Contrast, colour, brightness,
sharpness, tint, picture adjustment, picture format.

MENU

Advertising