La Crosse Technology Radio-Controlled Travel Alarm Clock WT-2160 - Manual (Page 5)

3
I. BATTERY INSTALLATION
A. The battery is included in the clock with
a plastic insulating strip that needs to be
removed to activate the clock.
1. Using a coin, turn the battery cover
slightly counter-clockwise.
2. Take off the cover; you may need to pry
it off using a paperclip or other small
object.
3. Remove the plastic from under the
battery.
B. Install the battery, type LR44, with the
positive side facing out. The alarm will
sound briefly after installation; do not
press any buttons for 10 minutes.
Battery
cover
Battery
Compartment